920 Compact Wheel Loader

Product Specs

• Engine

Rated Net Power - Rated Engine Speed

2200r/min

Rated Net Power - SAE J1349

120HP

Maximum Gross Power - ISO 14396 (metric)

122HP

Rated Net Power - ISO 9249

118HP

Maximum Gross Torque - SAE J1995

372ft·lbf

Maximum Gross Torque - ISO 14396

369ft·lbf

Displacement

220in³

Bore

3.85in

Stroke

4.72in

Engine Model

Cat C3.6

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396

121HP

Maximum Gross Power

121HP

Maximum Gross Power

121HP

Bore

3.86in

Stroke

4.72in

Displacement

220in³

Maximum Gross Power - Maximum Engine Speed

2350r/min

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Rated Net Power - Rated Engine Speed

2200r/min

Rated Net Power - SAE J1349

120HP

Maximum Gross Power - ISO 14396 (DIN)

122HP

Maximum Gross Power - ISO 14396

121HP

Maximum Gross Torque - SAE J1995

372ft·lbf

Engine Model

Cat C3.6

Maximum Gross Power - SAE J1995

123HP

Rated Net Power - ISO 9249 (DIN)

120HP

Rated Net Power - ISO 9249

118HP

Maximum Gross Torque - ISO 14396

369ft·lbf

• Transmission

Forward and Reverse - Speed Range 1*

6.3mile/h

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 1*

6.3mile/h

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

• Buckets

Bucket Capacities - General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

Bucket Capacities

1.3-1.9 m3 (1.7-2.5 yd3)

Bucket Capacities

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

• Weights

Operating Weight

21742lb

Operating Weight

21742lb

• Steering

Maximum Working Pressure - Steering Pump

3190psi

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.3s

Steering Articulation Angle - Each Direction

40°

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.4turns

Maximum Flow - Steering Pump

21.7gal/min

Maximum Working Pressure - Steering Pump

3190psi

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.3s

Steering Articulation Angle - Each Direction

40°

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.4turns

Maximum Flow - Steering Pump

21.7gal/min

• Loader Hydraulic System

Relief Pressure - Tilt Cylinder

4641psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

25gal/min

Maximum Flow - Implement Pump

43.6gal/min

Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure

4641psi

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7s

Note

All cycle times listed are with cylinder snubbing turned off.

Maximum Working Pressure - Implement Pump

4061psi

Hydraulic Cycle Time - Total Cycle Time

11.5s

Hydraulic Cycle Time - Rackback

2.2s

Maximum Flow - Implement Pump - 4rd Function, Maximum Flow

25gal/min

Hydraulic Cycle Time - Dump, at Maximum Reach

1.8s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

4.8s

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

40gal/min

Relief Pressure - Tilt Cylinder

4641psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

25gal/min

Maximum Flow - Implement Pump

43.6gal/min

Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure

4641psi

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7s

Note

All cycle times listed are with cylinder snubbing turned off.

Maximum Working Pressure - Implement Pump

4061psi

Hydraulic Cycle Time - Total Cycle Time

11.5s

Hydraulic Cycle Time - Rackback

2.2s

Maximum Flow - Implement Pump - 4rd Function, Maximum Flow

25gal/min

Hydraulic Cycle Time - Dump, at Maximum Reach

1.8s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

4.8s

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

40gal/min

• Service Refill Capacities

Transmission

0.8gal (US)

Engine Crankcase

2.6gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Axles - Rear

4.5gal (US)

Cooling System

5.7gal (US)

Hydraulic System - Including Tank

25.9gal (US)

Axles - Front

4.5gal (US)

Fuel Tank

43.6gal (US)

Hydraulic Tank

14.5gal (US)

Note

DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Transmission

0.8gal (US)

Engine Crankcase

2.6gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Axles - Rear

4.5gal (US)

Cooling System

5.7gal (US)

Hydraulic System - Including Tank

25.9gal (US)

Axles - Front

4.5gal (US)

Fuel Tank

43.6gal (US)

Hydraulic Tank

14.5gal (US)

Note

DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

• Axles

Rear

Oscillating ±11 degrees; Locking differential (standard)

Front

Fixed; Locking differential (standard)

Rear

Oscillating ±11 degrees; Locking differential (standard)

Front

Fixed; Locking differential (standard)

• Cab

ROPS

ISO 3471:2008

FOPS

EN ISO 3449:2008 (ISO 3449:2005)

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

ROPS

ISO 3471:2008

FOPS

EN ISO 3449:2008 (ISO 3449:2005)

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

• Tires

Other Choices Include

17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid

Standard Size

17.5 R25 L2 XTLA

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Other Choices Include

17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid

Standard Size

17.5 R25 L2 XTLA

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.