Boyd CAT Logo

Marine Generator Sets:

C9.3 Marine Generator Set

Contact Us About This Product

Click a link to download the document:

C9.3 ACERT Generator Set
Minimum Rating
185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
Maximum Rating
250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
Frequency
50 Hertz & 60 Hertz
Speed
1500 rpm @ 50Hz & 1800 rpm @ 60Hz

C9.3 ACERT genset packages with heat exchanger or keel cooling are available with60 Hertz ratings of 250 ekW (313 kVA) and 300 ekW (375 kVA) and 50 Hz ratings of 200 ekW (250 kVA) and 250 ekW (313 kVA). Radiator cooled gen sets are with 60 Hz ratings of 224 ekW (280 kVA) and 274 ekW (343 kVA) and 50 Hz ratings of 185 ekW (231 kVA) and 235 ekW (294 kVA). The C9.3 propulsion, auxiliary, and generator set engines have a common rail fuel system for optimal combustion and lower emissions. Cooling system options for the propulsion and auxiliary engines include heat exchanger with sea water aftercooling, and keel with combined circuit or separate circuit aftercooling. The genset packages are available with heat exchanger, keel, or radiator cooling. These products are EPA Tier 3 and IMO II certified. In addition the propulsionengine ratings are EU Stage IIIA certified and auxiliary and gen sets are also CCNR Stage II certified.

Product Specs

  • Generator Set Specifications

    • Minimum Rating
    185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
    Maximum Rating
    250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
    Frequency
    50 Hertz & 60 Hertz
    Speed
    1500 rpm @ 50Hz & 1800 rpm @ 60Hz
    Minimum Rating
    185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
    Maximum Rating
    250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
    Frequency
    50 Hertz & 60 Hertz
    Speed
    1500 rpm @ 50Hz & 1800 rpm @ 60Hz
    Emissions/Fuel Strategy
    EPA Tier 3, IMO II, EU IW

  • Generator Set Configurations

    • Emissions/Fuel Strategy
    EPA Tier 3, IMO II, EU IW

  • Engine Specifications

    • Engine Model
    C9.3
    Aspiration
    Turbocharged Aftercooled
    Bore
    4.13in
    Stroke
    5.31in
    Fuel System
    Common Rail
    Aspiration
    Turbocharged Aftercooled
    Bore
    4.13in
    Stroke
    5.31in
    Engine Model
    C9.3

  • Generator Set Dimensions

    • Width of Engine
    50.4in
    Height
    56.5in
    Length - Engine
    85.8in
    Weight - Approximate
    5219lb
    Height
    56.5in
    Width - Engine
    50.4in

  • Generator Specifications

    • Drip Proof
    IP23
    Excitation
    Permanent Magnet
    Number of Leads
    12-Lead 2 wires per lead
    Insulation
    Class H
    Voltage Regulator
    approx. 0.5%
    Drip Proof
    IP23

Equipment

  • Air System
    • Air cleaner with integrated fumes disposal
  • Control System
    • Extension harnesses, MCS controller (MGCP III B, MGCP II), EMCP 4.2 control panel
  • Generators & Generator Attachments
    • RH or LH service, RTD module, potential transformer, power analyzer module, extension box, generator oversizing, IP44
  • Fuel System
    • Double wall fuel lines, manual or electric priming pump, simplex or duplex primary fuel filter, simplex or duplex secondary and tertiary fuel filter
  • Lube System
    • Simplex or duplex oil filter, manual sump pump and oil drain
  • Starting System
    • 24V electric starting motor, air starting motor, jacket water heater, charging alternator
  • Protection System
    • SOLAS fuel and oil shielding; safety shutdowns for low oil pressure, high water temperature, and overspeed
  • Marine Classification Society (mcs) Approval –
    • ABS, BV, DNV, LR, GL, PRS, RINA, CCS, RS

Request a Quote

Find a Boyd CAT
Location or Rep Near You