930M Ag Handler Small Wheel Loader

Product Specs

• Weights

Operating Weight

31876lb

Operating Weight

31382lb

• Buckets

Bucket Capacities

3.1-5.0 m3 (4.0-6.5 yd3)

Bucket Capacities – Light Material

3.1-5.0 m3 (4.0-6.5 yd3)

Bucket Capacities

2.1-5.0 m³ (2.7-6.5 yd³)

Bucket Capacities - Light Material

3.1-5.0 m³ (4.0-6.5 yd³)

• Engine

Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)

160hp

Maximum Gross Power – ISO 14396 (DIN) (Standard Power Mode; Speed Range 1-3*)

162hp

Rated Net Power at 1,600 rpm – SAE J1349 (Standard Power Mode; Speed Range 1-3*)

154hp

Rated Net Power at 1,600 rpm – SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)

141hp

Engine Model

Cat C7.1 ACERT

Rated Net Power at 1,600 rpm – ISO 9249 (DIN) (Standard Power Mode; Speed Range 1-3*)

158hp

Emissions

Engine meets Tier 4 Final emission standards.

Note

Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.

Maximum Gross Power

164hp

Note

Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.

Note

*Range 4 power is boosted to be the same as Performance Mode.

Engine Model

Cat® C7.1

Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)

162HP

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)

160HP

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)

1600r/min

Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*)

154HP

Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)

141HP

Maximum Gross Power

168HP

Displacement (Performance Power Mode: Speed Range 1-4)

428in³

Displacement (Standard Power Mode: Speed Range 1-3*)

427in³

Emissions

Engine meets U.S. EPA Tier 4 Final emission standards.

Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

170HP

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)

168HP

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)

601ft·lbf

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)

592ft·lbf

Note (1)

*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Note (2)

**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (3)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)

143HP

Stroke - Performance Power Mode: Range 1-4

5.3in

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)

797N·m

Note (4)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Bore (Standard Power Mode: Range 1-4)

4.1in

Maximum Rated Gross Power - ISO 14396

168HP

Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*)

158HP

Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*)

566ft·lbf

Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)

572ft·lbf

Displacement (Standard Power Mode; Speed Range 1-3*)

427in3

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800r/min

Maximum Gross Power – ISO 14396 (Performance Power Mode; Speed Range 1-4)

164hp

Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode; Speed Range 1-4)

166hp

Rated Net Power at 1,800 rpm – SAE J1349 (Performance Power Mode; Speed Range 1-4)

157hp

Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4)

157HP

Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4)

162HP

Maximum Gross Torque – ISO 14396 (Performance Power Mode; Speed Range 1-4)

592lbf-ft

Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4)

566ft·lbf

Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)

572ft·lbf

Displacement (Performance Power Mode; Speed Range 1-4)

427in3

• Steering

Steering Articulation Angle (each direction)

40°

Steering Cycle Times (full left to full right): At 1,800 rpm: 90 rpm steering wheel speed

2.4seconds

Number of Steering Wheel Turns – full left to full right or full right to full left

3.5turns

Maximum Flow – Steering Pump

34gal/min

Maximum Working Pressure – Steering Pump

3500psi

Maximum Steering Torque: 0 degrees (straight machine)

37155lbf-ft

Maximum Steering Torque: 40 degrees (full turn)

27747lbf-ft

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Steering Cylinder, Double Acting - Bore Diameter

2.8in

Steering Cylinder, Double Acting - Stroke

17.2in

Maximum Flow - Steering Pump

34gal/min

Maximum Steering Torque - 0° (Straight Machine)

37155ft·lbf

Maximum Steering Torque - 40° (Full Turn)

27747ft·lbf

Maximum Working Pressure - Steering Pump

3500psi

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.5turns

Steering Articulation Angle - Each Direction

40°

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed

2.4s

Note (1)

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited

2.8s

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed

2.4s

Steering Cylinder, Double Acting - Rod Diameter

1.6in

• Loader Hydraulic System

Maximum Flow – Implement Pump

50gal/min

Maximum Flow – Implement Pump: 3rd Function Maximum Flow*

50gal/min

Maximum Flow – Implement Pump: 4th Function Maximum Flow*

42gal/min

Maximum Working Pressure – Implement Pump

4061psi

Relief Pressure – Tilt Cylinder

4351psi

Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure

4061psi

Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure

4061psi

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Raise (ground level to maximum lift)

4.8seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Dump (at maximum lift height)

1.6seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Float Down (maximum lift to ground level)

1.8seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Total Cycle Time

8.2seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Raise (ground level to maximum lift)

4.3seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Dump (at maximum lift height)

1.4seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Float Down (maximum lift to ground level)

1.8seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Total Cycle Time

7.5seconds

Note

*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height

1.4s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level

1.8s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift

4.3s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time

7.5s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height

1.6s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level

1.8s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift

4.8s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time

8.2s

Maximum Flow - Implement Pump

50gal/min

Maximum Flow - Implement Pump - 3rd Function*

50gal/min

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42gal/min

Maximum Working Pressure - Implement Pump

4061psi

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Relief Pressure - Tilt Cylinder

4351psi

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure

4061psi

Cycle Times - 1,600 rpm - Standard: Total Cycle Time

10.1s

Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure

4061psi

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)

1.5s

Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time

9.3s

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)

2.7s

Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)

5.1s

Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)

2.7s

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

4061psi

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)

1.7s

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4351psi

Note (1)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)

5.7s

• Service Refill Capacities

Fuel Tank

51.5gal

Cooling System

7.9gal

Engine Crankcase

5.3gal

Transmission (gearbox)

2.2gal

Axles: Front

6.9gal

Axles: Rear

6.6gal

Hydraulic System (including tank)

43.6gal

Hydraulic Tank

23.8gal

Diesel Exhaust Fluid (DEF) Tank

5gal

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Axles - Front

6.9gal (US)

Axles - Rear

6.6gal (US)

Cooling System

7.9gal (US)

Diesel Exhaust Fluid (DEF) Tank

5gal (US)

Engine Crankcase

5.3gal (US)

Fuel Tank

51.5gal (US)

Hydraulic System - Including Tank

43.6gal (US)

Hydraulic Tank

23.8gal (US)

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Transmission - Gear Box

2.2gal (US)

• Transmission

Forward and Reverse: Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse: Range 2

8mph

Forward and Reverse: Range 3

17mph

Forward and Reverse: Range 4

25mph

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Forward - Range 2

8mile/h

Forward - Range 1*

1-13 km/h (0.6-8 mph)

Reverse - Range 4

25mile/h

Reverse - Range 2

8mile/h

Forward and Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward - Range 3

17mile/h

Forward and Reverse - Range 2

8mile/h

Forward and Reverse - Range 3

17mile/h

Forward - Range 4

25mile/h

Forward and Reverse - Range 4

25mile/h

Note

Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine

Reverse - Range 3

17mile/h

Reverse - Range 1*

8mile/h

• Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Note

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)

Note

*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Note (1)

*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab

Note (2)

*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*

101dB(A)

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*

68dB(A)

• Tires

Standard Size

20.5 R25, radial (L-3)

Other Choices Include:

20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)

Note

Other tire choices are available. Contact your Cat dealer for details.

Note

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Other Choices Include

20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Standard Size

20.5 R25, radial (L-3)

• Axles

Front

Fixed; Locking differential (standard)

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Front

Fixed; Locking differential (standard)

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

• Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket

Height - Ground to Cab**

10.92ft

Height - Ground to Beacon**

12.08ft

Height - Ground Axle Center**

2.17ft

Height - Ground Clearance**

1.25ft

Length - Overall*

27.25ft

Length - Rear Axle to Bumper

6.5ft

Length - Hitch to Front Axle

4.92ft

Length - Wheel Base

9.83ft

Clearance - Bucket at 45° *

10.42ft

Clearance - Loadover Height**

11.58ft

Clearance - Level Bucket**

13.33ft

Height - Bucket Pin**

14.42ft

Height - Overall**

18.67ft

Reach - Bucket at 45°*

4.42ft

Carry Height - Bucket Pin

2ft

Dig Depth**

5.3in

Width - Bucket

9ft

Width - Tread Center

6.25ft

Turning Radius - Over Bucket

20.92ft

Width - Over Tires

8.33ft

Turning Radius - Outside of Tires

17.67ft

Turning Radius - Inside of Tires

9.33ft

Rack Angle at Full Lift

51 degrees

Dump Angle at Full Lift

44 degrees

Rack Angle at Carry

48 degrees

Departure Angle

33 degrees

Articulation Angle

40 degrees

Tipping Load - Straight - ISO 14397-1*

16430lb

Tipping Load - Full Turn - ISO 14397-1*

13934lb

Breakout*

18808lb

Operating Weight*

31876lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

• Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket

Height - Ground to Cab**

10.92ft

Height - Ground to Beacon**

12.08ft

Height - Ground Axle Center**

2.17ft

Height - Ground Clearance**

1.25ft

Length - Overall*

27.58ft

Length - Rear Axle to Bumper

6.5ft

Length - Hitch to Front Axle

4.92ft

Length - Wheel Base

9.83ft

Clearance - Bucket at 45° *

10.17ft

Clearance - Loadover Height**

11.58ft

Clearance - Level Bucket**

13.33ft

Height - Bucket Pin**

14.42ft

Height - Overall**

19ft

Reach - Bucket at 45°*

4.67ft

Carry Height - Bucket Pin

2ft

Dig Depth**

5.3in

Width - Bucket

9ft

Width - Tread Center

6.25ft

Turning Radius - Over Bucket

21.92ft

Width - Over Tires

8.33ft

Turning Radius - Outside of Tires

17.67ft

Turning Radius - Inside of Tires

9.33ft

Rack Angle at Full Lift

51 degrees

Dump Angle at Full Lift

44 degrees

Rack Angle at Carry

48 degrees

Departure Angle

33 degrees

Articulation Angle

40 degrees

Tipping Load - Straight - ISO 14397-1*

16070lb

Tipping Load - Full Turn - ISO 14397-1*

13592lb

Breakout*

17246lb

Operating Weight*

32136lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

• Dimensions with Bucket - Standard Lift

Dump Angle at Full Lift

48°

• Power Train

Note

*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Rear Axle

Oscillating

Note (2)

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle

Fixed

Front Axle - Traction Aid*

Locking differential standard

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25

± 10.5 degrees

Brakes - Service

Inboard wet disc

Rear Axle - Traction Aid

Limited slip differential optional

Brakes - Parking

Spring applied hydraulically released

• Operating Specifications

Full Turn Tip Load

19424lb

• Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.