914 Compact Wheel Loader

Product Specs

• Engine

Maximum Gross Power

110HP

Engine Model

Cat C3.6

Maximum Gross Torque - ISO 14396

332ft·lbf

Maximum Gross Power - ISO 14396 (DIN)

111HP

Rated Net Power - ISO 9249

98HP

Maximum Gross Power - Maximum Engine Speed

2350r/min

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Rated Net Power - SAE J1349

99HP

Maximum Gross Power - ISO 14396

110HP

Maximum Gross Power - SAE J1995

111HP

Bore

3.85in

Rated Net Power - ISO 9249 (DIN)

99HP

Rated Net Power - Rated Engine Speed

2200r/min

Stroke

4.72in

Displacement

220in³

Maximum Gross Torque - SAE J1995

335ft·lbf

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396 (metric)

112HP

• Transmission

Forward and Reverse - Speed Range 2*

12.5mile/h

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

• Weights

Operating Weight

19103lb

• Buckets

Bucket Capacities

1.3-1.9 m3 (1.7-2.5 yd3)

Bucket Capacities - General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

• Steering

Maximum Flow - Steering Pump

22gal/min

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.75turns

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.8s

Maximum Working Pressure - Steering Pump

3263psi

Steering Articulation Angle - Each Direction

40°

• Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure

3046psi

Maximum Flow - Implement Pump

39gal/min

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

24gal/min

Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure

3046psi

Hydraulic Cycle Time - Total Cycle Time

12.5s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

5.2s

Maximum Flow - Implement Pump - 4th Function, Maximum Flow

24gal/min

Hydraulic Cycle Time - Dump, at Maximum Reach

1.4s

Relief Pressure - Tilt Cylinder

4931psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

32gal/min

Maximum Working Pressure - Implement Pump

4061psi

Hydraulic Cycle Time - Rackback

2.2s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

3.7s

• Service Refill Capacities

Cooling System

5.7gal (US)

Fuel Tank

43.6gal (US)

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Axles - Rear Center Differential

2gal (US)

Hydraulic System - Including Tank

25.9gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Engine Crankcase

2.6gal (US)

Hydraulic Tank

14.5gal (US)

Transmission

0.8gal (US)

Axles - Front Center Differential

2gal (US)

• Tires

Other Choices Include

17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Standard Size

17.5 R25 L2 XTLA

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

• Cab

ROPS

ISO 3471:2008

FOPS

EN ISO 3449:2008 (ISO 3449:2005)

Note (4)

*The measurements were conducted with the cab doors and windows closed.

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

• Axles

Rear

Oscillating ±11 degrees; Locking differential (Standard)

Front

Fixed; Locking differential (standard)