Cat Excavators:
302.7D CR Mini Hydraulic Excavator
- Engine Model
- Yanmar 3TNV76
- Net Power
- 20.7 hp
- Operating Weight
- 5890.0 lb
- Gross Power
- 24.3 hp
Product Specs
-
Engine
- Engine Model
- Yanmar 3TNV76
- Net Power
- 20.7hp
- Gross Power
- 24.3hp
- Displacement
- 68.0in3
- Rated Net Power (ISO 9249)
- 20.7hp
- Emissions
- Meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
- Note
- Engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
- Engine Model
- Yanmar 3TNV76
- Net Power
- 20.7HP
- Gross Power
- 24.3HP
- Displacement
- 68in³
- Rated Net Power - ISO 9249
- 20.7HP
-
Weights
- Operating Weight
- 5890.0lb
- Operating Weight with Canopy
- 5681.0lb
- Operating Weight - With Cab
- 6239lb
- Operating Weight
- 6239lb
- Operating Weight - With Canopy
- 6034lb
-
Hydraulic System
- Operating Pressure - Equipment
- 3263.0psi
- Operating Pressure - Travel
- 3263.0psi
- Operating Pressure - Swing
- 2987.0psi
- Operating Pressure - Equipment
- 3263psi
- Operating Pressure - Travel
- 3263psi
- Operating Pressure - Swing
- 2987psi
- Auxiliary Circuits - Primary
- 52.2 L/min at 225 bar (13.8 gal/min at 3,263 psi)
- Auxiliary Circuits - Secondary
- 30.8 L/min at 206 bar (8.1 gal/min at 2,988 psi)
- Maximum Bucket Force
- 5058lb
- Maximum Stick Force - Standard/Long
- 15.4 kN/13.6 kN (3,462 lbf/3,057 lbf)
- Pump Flow at 2,500 rpm
- 23.6gal/min
-
Blade
- Width
- 61.9in
- Width
- 61.9in
- Height
- 11.4in
- Dig Depth
- 16.5in
- Lift Height
- 15in
-
Dimensions
- Boom swing angle (Left)
- 75.0Degrees
- Boom swing angle (Right)
- 50.0Degrees
- Height
- 7.9ft
- Length of undercarriage
- 79.0in
- Minimum front linkage swing radius
- 21.0in
- Tail swing radius
- 30.0in
- Track width
- 30.0in
- Width
- 5.15ft
- Maximum Dig Height
- 4170/4300 mm (13 ft 8 in/14 ft 1 in)
- Boom Swing Angle - Left
- 75°
- Maximum Digging Depth
- 2544/2744 mm (8 ft 4 in/9 ft 0 in)
- Boom Swing Angle - Right
- 50°
- Maximum Dozer Dig Depth
- 16in
- Height
- 7.9ft
- Maximum Dozer Lift Height
- 15in
- Length - Undercarriage
- 79in
- Maximum Dumping Height
- 2840/2970 mm (9 ft 4 in/9 ft 8 in)
- Minimum Front Linkage Swing Radius
- 21in
- Maximum Reach
- 4613/4805 mm (15 ft 1 in/15 ft 10 in)
- Tail Swing Radius
- 30in
- Maximum Reach - Ground Level
- 4481/4681 (14 ft 8 in/15 ft 5 in)
- Track Width
- 30in
- Maximum Vertical Dig Depth
- 1962/2152 mm (6 ft 5 in/7 ft 1 in)
- Width
- 5.15ft
- Transport Length - Arm Lowered
- 14ft
-
Service Refill Capacities
- Fuel Tank Capacity
- 9.3gal
- Fuel Tank Capacity
- 9.3gal (US)
- Hydraulic Tank Capacity
- 7gal (US)
-
Lift Capacity at Ground Level with Cab - Lift Point Radius: Maximum
- Note
- * The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
-
Travel System
- Gradeability
- 30°/58%
- Travel Speed
- 2.1 km/h/3.8 km/h (1.30 mph/2.36 mph)
Equipment
-
- Standard Equipment
-
- 1-way and 2-way (combined function) auxiliary hydraulic lines
- 300 mm rubber track
- Canopy with Tip Over Protection (TOPS) ISO 12117
- Dozer blade with float function
- Hydraulic oil cooler
- Maintenance free battery
- Retractable seat belt
- Suspension seat, vinyl covered
- Travel pedals
- Working light mounted to boom
-
- Optional Equipment
-
- Additional hydraulic circuit diverted from bucket cylinder
- Auto idle (Standard in North America)
- Bio oil
- Boom check valve
- Cab, radio ready with FOPS ISO 10262 (Level 1), Tip Over Protection (TOPS) ISO 12117, heater/defroster, interior light and windscreen wiper
- Custom color paint
- Ecology drain for engine oil
- Ecology drain for hydraulic tank
- Front screen guard for cab and canopy
- Joystick mounted proportional auxiliary control
- Mechanical quick coupler
- Mirror pack
- Rotating beacon
- Suspension seat, fabric covered
- Thumb ready stick (Standard in North America)