- Drive shaft torque @ max pressure
- 815.0 lb ft
- Drive method
- Gerotor Motor - Direct
- Mounting bracket design
- Mini Hydraulic Excavator
- Weight
- 178.6 lb
Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.
Product Specs
-
Dimensions
- Drive shaft torque @ max pressure
- 815.0lb ft
- Drive method
- Gerotor Motor - Direct
- Mounting bracket design
- Mini Hydraulic Excavator
- Weight
- 178.6lb
- Optimal Hydraulic Flow
- 75-90 L/min (20-24 gpm)
- Maximum hydraulic flow
- 20.0gal/min
- Overall Height
- 35.4in
- Maximum hydraulic pressure
- 2988.0psi
- Overall width w/bracket
- 11.0in
- Drive Shaft Torque at Maximum Pressure
- 815lb/ft
- Overall Drive Unit Height
- 35in
- Drive Method
- Gerotor Motor - Direct Drive
- Housing Diameter
- 11in
- Mounting Bracket Design
- 2 Ton Mini Excavator Pin On
- Swing Range (fore/aft)
- 36 degrees
- Overall Width - With Bracket
- 11in
- Hex Output Shaft Size
- 2in
- Required Hydraulic Flow
- 75-90 L/min (20-24 gpm)
- Drive Unit Weight (w/o Bits)
- 179lb
- Required Hydraulics
- Standard Flow
- Effective Displacement
- 24in
- Drive Gear Reduction
- 1:1
- Bit Speed at Maximum Flow
- 191 rpm
- Optimal Hydraulic Pressure
- 105-150 bar (1523-2176 psi)
- Auger bit retention
- Cross bolt/nuts
- Overall Length - With Bracket
- 11in
- Swing Range (L/R)
- 76 degrees
- Motor Displacement
- 24in³