- Drive shaft torque @ max pressure
- 1700.0 lb ft
- Drive method
- Gerotor Motor - Direct Drive
- Mounting bracket design
- Mini Hydraulic Excavator
- Weight
- 257.9 lb
Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.
Product Specs
-
Dimensions
- Drive shaft torque @ max pressure
- 1700.0lb ft
- Drive method
- Gerotor Motor - Direct Drive
- Mounting bracket design
- Mini Hydraulic Excavator
- Weight
- 257.9lb
- Optimal Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Overall Height
- 37.3in
- Drive Shaft Torque at Maximum Pressure
- 1699.3lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- 2 Ton Mini Excavator Pin On
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400 psi)
- Overall Width - With Bracket
- 11.1in
- Required Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Required Hydraulics
- Standard Flow
- Drive Gear Reduction
- 1:1
- Overall Length - With Bracket
- 11.1in
- Swing Range (L/R)
- 76 degrees
- Motor Displacement
- 38in³
- Maximum hydraulic flow
- 21.0gal/min
- Maximum hydraulic pressure
- 3336.0psi
- Overall width w/bracket
- 10.6in
- Overall Drive Unit Height
- 37in
- Housing Diameter
- 11in
- Swing Range (fore/aft)
- 70 degrees
- Hex Output Shaft Size
- 2in
- Drive Unit Weight (w/o Bits)
- 257lb
- Effective Displacement
- 38in³
- Bit Speed at Maximum Flow
- 127 rpm
- Auger bit retention
- Cross bolt/nuts